PicoScale sensor head with focused probe beam to measure displacements of small targets and with higher angular tolerances.
|Output beam||Diameter Ø ≈ 30 µm (customizable)|
|Focal length||13 mm (customizable)|
|Housing||Ø 6 mm x 22 mm (material: titanium)|
|Vacuum/Ultra-High Vacuum Compatibility||Optional|
F01 Operation Principle
The F01 is a sensor head for the PicoScale with focused probe beam. In the F01 sensor head, the laser beam is expanded and then focused down to a beam diameter of approximately 30 µm ( customizable). This focusing allows to measure on small targets and allows large angular tolerances. The lateral working range is, however, reduced.